TSI Flow Products manufactures 2" and 3" 1502 TEE Connections in multiple sizes and configurations. Available with standard connectors or the upgraded 3" DC15 Connection. Crossovers are available to make any configuration you need.
Integral Fittings Features
Connection Strength: Integral Fittings are made from one solid piece of metal providing more strength at the connection where it’s needed most.
Better Flow Geometry: The leading chamfers at the bore of TSI Integral Fittings creates less turbulence therefore reducing erosion.
Larger Wall Thickness: Our Integral Fittings have a larger wall thickness at the connection to allow the pipe a longer service life.
Replaceable Wingnuts: With a removable retainer ring, the wingnuts on TSI Integral Fittings can be replaced when necessary to allow continued service of the pup joint.

FF-1502-301
2” 1502 Connections:
(A) – Female Face to Male Center: 5.00”
(B) – Male Face to Female Center: 7.00”
3” 1502 Connections:
(A) – Female Face to Male Center: 8.13”
(B) – Male Face to Female Center: 8.13”

FF-1502-425-1

FF-1502-426-1

FF-1502-422-1

FF-1502-401

FF-1502-410

FF-1502-422-1
TSI 2" and 3" 1502 Crosses
TSI Flow Products manufactures and sells Crosses and Elbows for 2 inch and 3 inch 1502 Connections. Crosses are available in multiple sizes and configurations. Contact your TSI Flow Products sales rep today for more information or to place an order.

FF-3180-1
2” 1502 Connections:
- (A) – Male Face to Female Center: 7.00”
- (B) – Female Face to Male Center: 5.00”
3” 1502 Connections:
- (A) – Male Face to Female Center: 8.13”
- (B) – Female Face to Male Center: 8.13”
- Available in Standard and H2S Service
- H2S Svc. Made Per Nace Standard MR0175 ISO15156
- NPT and Autoclave Ports are available upon request
- TEE’s are available in multiple sizes and configurations
Material | ||
---|---|---|
Service | Body | Working Pressure (PSIG) |
Standard | Non-NACE | 15,000 PSIG |
Sour Service |
NACE Standard MR0175 |
10,000 PSIG |