TSI manufactures CH-22 and CH-29 Casing Spools with BP or L Outfits. BP Casing spools are supplied with 2 lock screws for wear bushing retention, and L Casing Spools are supplied with a full set of lock screws for casing hanger and pack off retention upon request.

CH-22 / CH-29 Casing Spools

  • Outfits - Line Pipe of Studded side outfits
  • Lock Screws
  • CH-22-BP and CH-29-BP casing spools are supplied with 2 lock screws for wear bushing retention.
  • CH-22-L and CH-29-L casing spools are supplied with a full set of lock screws for casing hanger and pack off retention upon request
  • Bottom Preperations - BG bottom, for use with PE or 4-0 secondary bushing (Standard). Other secondary seal optons avaialable upon request.
TSI casing spools
TSI casing spool dimensions
TSI casing spool options
Bottom Flange SizeWorking PressureTop Flange SizeWorking PressureFlow SizeABCDWeight
in psi in psi in in in in in lb
11 3,000 11 3,000 2-1/16" Std 21-1/2 11 8 11-3/4 948
11 3,000 11 5,000 2-1/16" Std 26 12-7/8 8 10-7/8 1213
11 5,000 11 5,000 2-1/16" Std 26-1/4 12-7/8 8 10-7/8 1422
11 5,000 11 10,000 1-13/16" Std 26-1/4 13-1/8 8 10-7/8 1830
11 10,000 11 10,000 1-13/16" Std 26-1/4 13-1/8 9 10-7/8 1687
13-5/8 3,000 11 3,000 2" LP 22 10-5/8 9 10-7/8 902
13-5/8 3,000 11 3,000 2-1/16" Std 22 10-5/8 9 10-7/8 1323
13-5/8 3,000 11 5,000 2" LP 26 13-3/8 9 10-7/8 1477
13-5/8 3,000 11 5,000 2-1/16" Std 26 13-3/8 9 10-7/8 1455
13-5/8 5,000 11 5,000 2-1/16" Std 26 13-3/8 9 10-7/8 1488
13-5/8 5,000 11 10,000 1-13/16" Std 26-1/4 13 9 10-7/8 1631
20-3/4 3,000 13-5/8 3,000 1-13/16" Std 26 13 9 13-5/8 1400
20-1/4 3,000 13-5/8 5,000 2-1/16" Std 26 13 12-1/2 13-5/8 2690
21-1/4 2,000 13-5/8 5,000 2-1/16" Std 26-3/4 13-3/4 12-1/2 13-5/8 2469